Saturday, 20 April 2024

Occupational Safety

The consultancy services offered by our Occupational Safety Division are as follows; 

 

LEGAL COMLIANCE
Major Hazard
  • Establishment of demonstration  of safe operation
  • Report on industrial activity and preparation of emergency plan for major hazard installation
Inspection Services
  • Any activities that need designated person’s inspection e.g scaffold, demolition, confined space, formwork erection, safety belt, lifeline, safety net. Etc (Reference: FMA 1967)
 
OSH SOLUTION
  • Establishment of HIRARC and job hazard/safety analysis ( JH/SA)
  • OSH Training Need (OTN) Solution
  • Facilities Integrity Inspection
  • Establishment of Qualitative, Semi-Quantitative or Quantitative Risk Assessment (QRA)
  • Establishment of PTW System
  • Conduct Workplace Assessment / Inspection; 
  • Conduct Specific Gap Analysis e.g Status Implementation of machinery, operation or facilities, etc
 
ADVISORY SERVICES
  • Customized / Tailored  OSH program
  • Transport Driver/ Rider Safety (Motorcycle, Car, Heavy Vehicle, etc;
  • Forensic incident investigation e.g method improvement, corrective and preventive recommendation, lesson learnt, etc
  • Developing Emergency Response and Preparedness Competent Person e.g Emergency Response Team, Crisis Management Team, Incident Command System, etc
  • High Risk activity e.g, pruning, working at height, logging in forestry industry, machinery operation or handling in agriculture industry, etc.
 
TECHNICAL SERVICES
  • Equipment testing and calibration e.g. pressure gauge testing, multi gas detector, etc
  • Hydrostatic testing for breathing apparatus cylinder
  • Corrosion test for breathing apparatus cylinder
  • PPE testing and services e.g. helmet, bump cap, goggle, harness, etc
  • Certificate of conformance issuance e.g. testing equipment  certification, etc
  • OSH product recognition e.g meeting Malaysia Standard Requirement, etc
  • Fall prevention system inspection e.g. lifeline structure , rescue system, etc
  • Engineering safety design e.g plant layout design, structural design, etc
  • OSH multimedia development e.g. simulation, on-line system, Computer Based Training (CBT), induction/awareness video, soft skill – software, etc

Contact Info
Fax : 03-8920 9842
Email : This email address is being protected from spambots. You need JavaScript enabled to view it.

Occupational Health

Our Occupational Health Division was established with the objective to promote and maintain the physical, mental and social well being of all employees.

The consultancy services offered by our occupational health division are:

1. Occupational Health Consultancy

  • Health Risk Assessment

  • Medical Surveillance as mandated by legislation

  • Fitness-for-work Assessment

  • Impairment Assessment for Compensation Management (SOCSO + Insurance)

  • Medical Maritime Consultancy (MEA) *By appointment only

  • Medical Competent Person Examination (MCPE) *By appointment only

2. Occupational Health Training & Lecture

  • Total Health Promotion

  • Love Your Heart Programme

  • Protect Your Lung - Quit Smoking Programme

  • Occupational First Aid

3. Mobile Occupational Health Services

4. Occupational Medicine Center

Contact Info
Fax : 03-8926 9842
Email : This email address is being protected from spambots. You need JavaScript enabled to view it.

Ergonomics

NIOSH Ergonomics Division was established to promote an occupational environment for persons at work, which is adapted to their physiological and psychological needs. The consultancy services offered are Ergonomic Study, Office Ergonomic, Workstation Design, Workplace evaluation and others such:

1. Evaluation of Working Environment

  • Heat Stress
  • Human Vibration

2. Evaluation of Working Condition

3. Interactive Ergonomics Plan

4. Evaluation of Design of Equipment workstation

5. Ergonomics Risk Assessment

6. Industrial Ergonomics

7. Standing at Work

8. Ergonomics for Safety Committee

9. Total Wellness and Health Promotion

10. Back Protection Program

11. Safehandling of Forklift Truck Competency Program

12. Ergonomics abd Manual Handling

13. Ergonomics in the office

Contact Info
 Fax : 03-8920 9842
Email : This email address is being protected from spambots. You need JavaScript enabled to view it.

Industrial Hygiene

Industrial Hygiene Division at NIOSH Malaysia offer a wide range of consultancy services whether to meet the requirement of the law or to improve the safety and health at workplace.

Our vision is to be the preferred partner in enhancing Occupational Safety & Health.
 
 Chemical Health Risk Assessment (CHRA)
 
Chemical Health Risk Assessment (CHRA) is cornerstone on which compliance with the Use and Standard of Exposure of Chemicals Hazardous to Health (USECHH) Regulations 2000 is achieved. USECHH Regulations require employer to make a comprehensive assessment of the risk of employees exposure to chemical hazardous to health in the workplace for the purpose of enabling decision to be made on appropriate control, measure, further training of employee, and monitoring and health surveillance activities as may be required to protect the health of employees who may be exposed to chemical hazardous to health at work.NIOSH offer comprehensive CHRA services in providing guidance on improving current control measure. Complete with report and the recommendation in accordance to USECHH 2000.
 
 
Monitoring of Chemical Hazardous to Health
 
Monitoring is to be conducted on employees exposure to chemical hazardous to health listed in Schedule II of the USECHH Regulation 2000 and where CHRA recommend monitoring to be conducted in accordance with an approved method of sampling and analysis for the chemical hazardous to health. Workplace exposure monitoring also may be required for other reason such as:
  • To ensure the employees exposure level are maintained below the Permissible Exposure Limits

  • To ensure the maintenance of adequate control measure

  • To quantify exposure during new process set-up

  • To assess the effects of a change in process specification

  • To ensure that the risk assessment is still valid

NIOSH offer a comprehensive monitoring service, tailored to meet any or entire above requirement. We can offer the best with the most up to date equipment and services in workplace.
 
 
 Inspection and Testing of Local Exhaust Ventilation
 
Local Exhaust Ventilation (LEV) system is commonly used to remove hazardous gases, fume, vapours and dust from workplace. Poorly design and maintenance of LEV system may result in the failure to adequately control employee exposure to hazardous chemical and hence a breach of the USECHH 2000 and may cause illness to employees.
 
NIOSH offer a full range of LEV testing and inspection services to ensure that the system are suitable for the purpose of controlling chemical hazardous to health and remain within specification. Data from the testing and examination of LEV and exposure monitoring will provide information to employer that the control measures are within specifications and permissible exposure limit in compliance with USECHH 2000 requirements.
 
 
Noise Exposure Monitoring
 
Noise monitoring will be conducted by qualified and experienced competent person to evaluate employees exposure to noise. Personal monitoring will be carried out among the employees using the Noise Dosimeter. Sound level meter will be used to identify the noise sources as well as their levels and types of noise that exposed to the employees. Other than that, noise mapping also will be carried out to identify zones with Noise Level less or greater than 85dB (A).
 
NIOSH offers comprehensive noise monitoring in order to measure the noise level at your workplace that expose to your workers. We believe that our services are tailored for complying with the regulations and better than other.
 
 
Formulation and Translation of CSDS
 
Chemical / Material Safety Data Sheet (CSDS/MSDS) means an up to date hand out or information sheet containing relevant information to pertaining to the hazardous chemical or preparation which is vital for establishing arrangements in the use of the chemical or preparation at work.
The CSDS must consist of minimum 15 elements and must be written in both Bahasa Malaysia and English.
 
NIOSH conducts the formulation and translation of CSDS to assist the industries especially for chemical suppliers to comply with the regulation.
 
 
Indoor Air Quality Assessment
 
Indoor Air Quality (IAQ) simply refers to the quality of the air in an occupied building environment. NIOSH provides a complete assessment services in order to assess the IAQ level at your workplace. Assessment program will be conducted according to proper method of assessment and sampling procedures,

Assessment will be started with walk-through survey to identify the potential indicators of concern including pollutant sources, pollutant pathways, ventilations, microbiological agents and others. Next, the measurement will be carried out to identify the IAQ level at your workplace according to approved method.

This assessment is designed to identify the IAQ problems and helps you to develop corrective action plans. The result and recommendations from the assessment will be stated in the report.
 
 
Contact Info
Fax : 03-8920 9842
Email : This email address is being protected from spambots. You need JavaScript enabled to view it.

 

 

 

Occupational Safety And Health Management

Occupational Safety And Health Management Division (OSHMD) operates under the Consultation, Research and Development Department (CRD) in NIOSH Malaysia. Our core activities are to provide consultation services in terms of legal compliance, advisory, establishment and other OSH solution.

The general responsibilities of OSHMD are:
  •  Provide consultancy services on legal compliance, OSH solution, advisory services and technical/ establishment services
  • Promote OSHMD services to related sectors and industries

  • Conduct research pertaining to OSH Management issue

  • Development of new services, client and new product

  • Support another division under CRD and NIOSH as a whole

 
The specific consultancy services provided by OSHMD are:
1. Legal Compliance
  • Establish/ Develop OSH Policy

  • Establish Safety and Health Committe

  • Accident Reporting and Investigation Documentation and Procedure Development

  • Establish Emergency Responses Plan Documentation and Arrangement

  • New Factory Installation Procedure and Application

  • Initial Site Assesment (Penilaian Awal Tapak)

  • Environment Impact Assessment

  • Radiological Impact Assessment

 2. OSH Solution

  • Personal Protective Equipment Management

  • Legal Register Management

  • Schedule Waste Management

  • Air Emission Management

  • Waste Water Management

  • Industrial Effluent Management

  • Ionizing Radiation Protection Management

  • HACCP Management

  • OHSAS 18001 Gap Analysis

  • MS 1722 Gap Analysis

  • EMS 14001 Gap Analysis

  • Integrated System Gap Analysis

  • OSH System Initial Review

  • OSH Auditibng & Performance Measurement

 3. Advisory Services

 4. Technical/ Establishment Services

 
Contact Info
Fax : 03-8920 9842
Email : This email address is being protected from spambots. You need JavaScript enabled to view it.

 

 

 

open