NIOSH FORUM

It is currently Sun Oct 26, 2014 4:20 pm

All times are UTC + 8:45 hours




Post new topic Reply to topic  [ 443 posts ]  Go to page Previous  1 ... 41, 42, 43, 44, 45  Next
Author Message
 Post subject: Re: Melaka Safety Corner (MSC)
PostPosted: Fri Sep 30, 2011 7:45 am 
Offline

Joined: Thu Dec 13, 2007 5:15 pm
Posts: 610
Location: Melaka - KL - Penang - JB - Vietnam - Brunei - Indonesia
Salam. Calling OSH guys for courses on:

Course title: Work Safely At Heights
Course date: 1 November 2011
Time: 08.00 - 16.00
Duration: 1 day
Course fee: SGD $150.00 per person

Course title: Confined Space Training
Course date: 2-3 November 2011
Time: 08.00 - 16.00
Duration: 2 days
Course fee: SGD $300.00 per person

Location: BATAM, INDONESIA. Contact me directly for arrangement of departure & return (Ferry & Accommodation - Excluded) 0123754941 / 0196874242

WORKING SAFETY AT HEIGHT (WSH)

Purpose
An average of 1260 workers are injured every year due to falling from heights. Most of these falls are from relatively low heights (5m or less). This course is designed to provide participants with the necessary knowledge and skills to work safely at heights suitable for those working in the mining and resources industry, and the building and construction industry. On completion of this course, participants will have knowledge of the OHS, legislation and Australian Standards relating to working at heights; be able to identify and control hazards; understand job planning and resources required, access and egress; fall arrest systems and Personal Protective Equipment plus work confidently and competently at heights.
Pre requisite
There are no pre requisites for the Safe Working at Heights course.
Course Content
The Safe Working at Heights training plan is derived from the Metalliferous Mining Training Package (MNM05) unit of competency:
MNMG237A – Work Safely at Heights
Legislation in the Workplace - O.S.H. Acts and Regulations; Mines Safety Inspection Act and Regulations; specific regulations referring to Fall Prevention; WorkSafe WA Code of Practice; National Standard for Licensing Persons Performing High Risk Work; Australian/NZ Standards 1891 part 1 to 4.
Plan Work - Job at hand; hazards; access and egress; eliminate hazards as far as is practicable; where hazards still exist plan for use of equipment to prevent falls.
Personal Protective Equipment - Fall Restraint Systems; Fall Arrest Systems including full-body harness donning, care and maintenance in accordance with AS 2626; lanyards; shock absorbers; fall-arrest devices; hardware and system clearances.
Safe Working at Heights - Edge protection; scaffolds; ladder and tower safety; anchor points and static lines; plant access and egress; EWP’s; tools and equipment at heights; house keeping and rescue procedures. Practical assessment - Fall arrest PPE inspection and demonstration of safe, confident working practices at heights.
Certification
On successful completion of this course, candidates will be issued with an Australian Skills Training Ltd Certificate of Competency in Safe Working at Heights.

CONFINED SPACE TRAINING (CSP)
Purpose
The aim of this training is to provide candidates with the necessary knowledge and skills to safely enter confined spaces. It also provides candidates with knowledge on the governing standards (AS 2865:2001) and legislative requirements for entering and working in confined spaces.
Pre requisite
There are no pre requisites for this course.
Course Content
The Confined Space Entry training plan is derived from the Mining Metalliferous Training Package units of competency:
PMAPER200C – Work in Accordance with an Issued Permit
PMAPER205B – Enter Confined Space
Legislation in the Workplace - O.S.H. Acts and Regulations; Mines Safety Inspection Act and Regulations; WorkSafe WA Code of Practice; Australian/NZ Standards 2865:2001.
Definition of Confined Space – AS 2865 definition; types of confined spaces.
Plan Work - Job at hand; hazards of a confined space; assessment procedures; Control measures; training requirements; permit requirements.
Personal Protective Equipment – Breathing equipment; rescue gear; gas monitoring equipment; fire fighting equipment.
Safe Working in Confined Spaces – procedures; types of work and restrictions.
Practical assessment – Prepare risk assessment documentation; set up work site, safe access into confined space.
Certification
On successful completion of this course, candidates will be issued with an Australian Skills Training Ltd Certificate of Competency in Confined Space Entry.

_________________
Mohammad Zailan Haji Siwan (Irzai)
SATC Training & Construction Services
Tel: 012-3754941 / 019-6874242
Email: zailan@scaffold-access.com
http://www.facebook.com/mohammad zailan haji siwan
http://www.skype.com/irzai1973


Top
 Profile  
 
 Post subject: Re: Melaka Safety Corner (MSC)
PostPosted: Fri Sep 30, 2011 5:56 pm 
Offline

Joined: Thu Dec 13, 2007 5:15 pm
Posts: 610
Location: Melaka - KL - Penang - JB - Vietnam - Brunei - Indonesia
PERJUMPAAN CRG-SHE WILAYAH TENGAH
(TERBUKA PADA SEMUA – REGISTER/TIDAK/LAMA/FRESH)

TARIKH: 1HB OKTOBER 2011 (SABTU BESOK)
LOKASI: NIOSH CAFÉ, BANGI
MASA;
12.30PM – 2.30PM JAMUAN MAKAN T/HARI
2.30 – 4.00PM: DISKUSI & MESYUARAT PERSATUAN (TERBUKA)

MENU MAKAN TENGAHARI
NASI PUTIH
KARI AYAM BERKENTANG
SOTONG GORENG TEPUNG
DAGING MASAK KICAP
SAYUR CAMPUR GORENG BERTEMPE + SOHOON
ULAMAN DAN SAMBAL BELACAN
BUAH BUAHAN
PUDING CARAMEL
TEH TARIK
KORDIAL

STALL
LAKSA PENANG
ABC

BAYARAN RM 15.00 / pax DIKENAKAN

_________________
Mohammad Zailan Haji Siwan (Irzai)
SATC Training & Construction Services
Tel: 012-3754941 / 019-6874242
Email: zailan@scaffold-access.com
http://www.facebook.com/mohammad zailan haji siwan
http://www.skype.com/irzai1973


Top
 Profile  
 
 Post subject: Re: Melaka Safety Corner (MSC)
PostPosted: Tue Oct 04, 2011 1:00 pm 
Offline

Joined: Thu Dec 13, 2007 5:15 pm
Posts: 610
Location: Melaka - KL - Penang - JB - Vietnam - Brunei - Indonesia
CRG-SHE Association (ROS: 1883-11 MEL) sedang giat menambah keahlian bagi SHO/SH Assistant/OYK/Safety promoter, ESH, HSSE, HT, RPO, AESP, AGT, SCAFF, OHN, OHD, Crane Operator dan sewaktu dengannya. Tuan/Puan serta saudara / saudari tak kira tua, muda, races or religion untuk mendaftar menjadi ahli persatuan. Borang boleh didapati daripada Setiausaha persatuan (En. Reza Huzainie) atau Cik Dhuha Shah ataupun mendaftar terus di Group Facebook Central Region. Sila ramaikan group ini yang merangkumi Negeri MELAKA - NSDK - SELANGOR - WP KL & WP Putrajaya. Pengamal OSH dari negeri lain juga boleh mendaftar. (United we strong!)

_________________
Mohammad Zailan Haji Siwan (Irzai)
SATC Training & Construction Services
Tel: 012-3754941 / 019-6874242
Email: zailan@scaffold-access.com
http://www.facebook.com/mohammad zailan haji siwan
http://www.skype.com/irzai1973


Top
 Profile  
 
 Post subject: Re: Melaka Safety Corner (MSC)
PostPosted: Fri Nov 18, 2011 2:56 pm 
Offline

Joined: Thu Dec 13, 2007 5:15 pm
Posts: 610
Location: Melaka - KL - Penang - JB - Vietnam - Brunei - Indonesia
JEMPUTAN KE BENGKEL KHIDMAT KEPAKARAN TEKNIKAL 2011 PASCA PENGURUSAN OSH SECARA TOTAL
Tarikh Pengesahan : SEBELUM 18 November 2011
Hubungi : En. Muhammad Zulazhar Bin Abd Halim
Telefon : 03 – 87692234
Email : mohamad.zulazhar@niosh.com.my
Program : 1 hari
( semua kos ditanggung oleh NIOSH & PERKESO kecuali penginapan )

Objektif Program:

1. Menerapkan keperluan-keperluan teknikal dan saintifik yang teras dalam pasca perlaksanaan pengurusan OSH.
2. Menerapkan Keperluan Teknikal Higiene Industri, Keperluan Teknikal Keselamatan Pekerjaan, Keperluan Teknikal Kesihatan Pekerjaan dan Keperluan Teknikal Perkhidmatan Makmal.
3. Memahami peranan Pertubuhan Keselamatan Sosial (PERKESO)dalam sektor pekerjaan.
4. Memahami peranan integriti Jabatan Keselamatan dan Kesihatan Pekerjaan (JKKP) sebagai rakan dalam penguatkuasaan JKKP terhadap industri.
5. Membuat hebahan kepada masyarakat industri tentang perkhimatan tambahan yang telah NIOSH sediakan iaitu khidmat perundingan serta penyelidikan dan pembangunan.
Kumpulan Sasaran:
- Tergolong daripada syarikat dan kakitangan yang mencarum dengan PERKESO dan majikan serta pekerja di semua sektor industri.

Tarikh Program:
1. Tarikh : 21 November 2011
Lokasi : SHAH’S VILLAGE HOTEL PETALING JAYA
No. 3 & 5 Lorong Sultan, 46200 Petaling Jaya, Selangor.

2. Tarikh : 22 November 2011
Lokasi : INTEKMA RESORT & CONVENTION CENTRE
Persiaran Raja Muda, Seksyen 7, 40000 Shah Alam, Selangor.

3. Tarikh : 23 November 2011
Lokasi : HOTEL SERI MALAYSIA PORT DICKSON
Lot PT 49, Jalan Pantai Batu 4, 71050 Port Dickson, Negeri Sembilan.

4. Tarikh : 24 November 2011
Lokasi : HOTEL SERI MALAYSIA MELAKA
Lebuh Ayer Keroh, 75450 Melaka.

5. Tarikh : 30 November 2011
Lokasi : HOTEL SERI MALAYSIA JOHOR BAHRU
Lot PTB 17648, Jalan Langkasuka 80350 Larkin, Johor Bahru.

6. Tarikh : 5 Disember 2011
Lokasi : HERITAGE HOTEL IPOH
Jalan Raja DiHilir, 30350 Ipoh, Perak.

7. Tarikh : 7 Disember 2011
Lokasi : HOTEL SERI MALAYSIA PULAU PINANG
No. 7, Jalan Mayang Pasir 2, Bandar Bayan Baru, 11950 Pulau Pinang.

8. Tarikh : 8 Disember 2011
Lokasi : HOTEL SERI MALAYSIA SG PETANI
Seksyen 21, Jalan Pasar 08000 Sg. Petani, Kedah.

9. Tarikh : 12 Disember 2011
Lokasi : MANIKAR BEACH RESORT
Jalan Batu Manikar, P.O.BOX 80498, 87014 Persekutuan Labuan, Malaysia.

10. Tarikh : 15 Disember 2011
Lokasi : LANGKAWI SEAVIEW HOTEL
Lot 40, Jalan Penarak, Kuah 07000 Langkawi, Kedah.


Agenda:

Bil Agenda masa
1 Perasmian & ucapan dari wakil PERKESO 8.00 am – 9.00 am
2 OSHMD – Teknikal & Teras 9.00 am – 10.00 am
3 REHAT 10.00 am – 10.30 am
4 OSD – Teknikal & Teras 10.30 am – 11.30 am
5 OHD – Teknikal & Teras 11.30 am – 12.30 am
6 REHAT TENGAH HARI 12.30 pm – 1.30 pm
7 ERGO – Teknikal & Teras 1.30 pm – 2.30 pm
8 R & D, Lab & Khidmat Rundingan 2.30 pm – 3.30 pm
9 REHAT 3.30 pm – 4.00 pm
10 Higiene Industri 4.00 pm – 5.00 pm

SELAMAT MENDAFTAR.

Zailan, Vung Tau, SR Vietnam

_________________
Mohammad Zailan Haji Siwan (Irzai)
SATC Training & Construction Services
Tel: 012-3754941 / 019-6874242
Email: zailan@scaffold-access.com
http://www.facebook.com/mohammad zailan haji siwan
http://www.skype.com/irzai1973


Top
 Profile  
 
 Post subject: NRG-SHE : CADANGAN PROGRAM 2012
PostPosted: Thu Dec 01, 2011 2:33 pm 
Offline

Joined: Sat Nov 03, 2007 7:44 pm
Posts: 205
Location: North Region - Malaysia
Assalamualaikum & Salam Sejahtera,

1) DIALOG KKP BERSAMA JKKP PULAU PINANG (20.02.2012)

2) BENGKEL SHO, KOTA KINABALU, SABAH (26 & 27.03.2012) - PROGRAM CEP (Terhad Kepada 40 Orang Sahaja)

3) NRG-SHE CONFERENCE 2012 - PULAU PINANG (14 & 15.05.2012) - PROGRAM CEP

4) BENGKEL KESELAMATAN PEMASANGAN PERANCAH - KEDAH DA (26 & 27.06.2012) - PROGRAM CEP
(Terhad Kepada 30 Orang Sahaja)

PIC : ALADDIN (019-417 9673)

Thanks & Best Regards,
NRG-SHE COMMITTEE MEMBERS

LOW COST, TECH-SAVVY, INNOVATIVE & ENERGETIC
http://www.nrg-she.com/


Top
 Profile  
 
 Post subject: Re: Melaka Safety Corner (MSC)
PostPosted: Tue Mar 13, 2012 9:12 am 
Offline

Joined: Wed Feb 29, 2012 9:37 pm
Posts: 2
SALAM BRO,

I"M JUST JOINT THIS FORUM ,MY NAME IS AWANG FROM BKT RAMBAI MELAKA,VERY GLAD TO JOINT THIS FORUM IS THERE ANY INFO FOR CEP COURSE AT THIS MOMENT.

WASALAM
AWANG


Top
 Profile  
 
 Post subject: Re: Melaka Safety Corner (MSC)
PostPosted: Tue Mar 13, 2012 9:12 am 
Offline

Joined: Wed Feb 29, 2012 9:37 pm
Posts: 2
SALAM BRO,

I"M JUST JOINT THIS FORUM ,MY NAME IS AWANG FROM BKT RAMBAI MELAKA,VERY GLAD TO JOINT THIS FORUM IS THERE ANY INFO FOR CEP COURSE AT THIS MOMENT.

WASALAM
AWANG


Top
 Profile  
 
 Post subject: Re: Melaka Safety Corner (MSC)
PostPosted: Fri Mar 16, 2012 10:57 am 
Offline

Joined: Thu Dec 13, 2007 5:15 pm
Posts: 610
Location: Melaka - KL - Penang - JB - Vietnam - Brunei - Indonesia
Salam!!! I'm back in action...welkom..... ikuti perkembangan semasa di salah satu saluran OSH di facebook:

1) Mohammad Zailan Haji Siwan
2) Malaysian Scaffold Dawgs
3) SIME Darby OSH Practitioners
4) SATC Training & Construction Community
5) HSE Practitioner (Group terbesar untuk HSE Forum Malaysia Online)
6) Southern Region HSSE Practitioners
7) MSG-Sungai Udang Corner
8) AGT & ES (Confine Space Group)
9) Community Marine & Maritime (Offshore & Marine activities)
10) Malaysian Steam & Internal Combustion Group (Boilers & Engineering)
11) Welder 1 Malaysia (Welding Group)
12) Malaysian Commercial Divers (Divers Group)
13) Central OSH Practitioners

Satu lagi Group yang sangat active dalam OSH Networking adalah NRG-SHE Association! Bergerak di sebelah utara menggunakan email networking! The best in its group...cuma facebook takde....hmmmmm...So, join us!!!

_________________
Mohammad Zailan Haji Siwan (Irzai)
SATC Training & Construction Services
Tel: 012-3754941 / 019-6874242
Email: zailan@scaffold-access.com
http://www.facebook.com/mohammad zailan haji siwan
http://www.skype.com/irzai1973


Top
 Profile  
 
 Post subject: Re: Melaka Safety Corner (MSC)
PostPosted: Fri May 18, 2012 11:03 pm 
Offline

Joined: Thu Dec 13, 2007 5:15 pm
Posts: 610
Location: Melaka - KL - Penang - JB - Vietnam - Brunei - Indonesia
Sekilas rasa...... nukilan hati: Nauzubillah! Apabila nafsu mengatasi akal...yang haram pun dihalalkan....what has happen to SHO masakini? Amanah yang diberikan untuk menjaga kawasan pentadbiran OSH disalah gunakan! Integriti HANCUR!!! Istilah dimana SHO 'pow' subcontractor sampai RM 3000 sebulan x 30 subcontractor is too much! Borang gate pass @ PTW pun kena 'huloq' $$$. Pernah kah SAUDARA FIKIRKAN bahawa dunia ini hanya pinjaman semata-mata! What are YOU going to answer di sana! Memalukan....disgraceful to Green Book Holder! Nombor perghhhh 15** Bagi anak bini makan sumber HARAM......fikirkanlah!!! Join us in Facebook for better picture on what on earth is happening!

_________________
Mohammad Zailan Haji Siwan (Irzai)
SATC Training & Construction Services
Tel: 012-3754941 / 019-6874242
Email: zailan@scaffold-access.com
http://www.facebook.com/mohammad zailan haji siwan
http://www.skype.com/irzai1973


Top
 Profile  
 
 Post subject: Re: Melaka Safety Corner (MSC)
PostPosted: Wed May 30, 2012 9:12 am 
Offline

Joined: Thu Dec 13, 2007 5:15 pm
Posts: 610
Location: Melaka - KL - Penang - JB - Vietnam - Brunei - Indonesia
As requested: PUBLIC Program will be conducted in SEPTEMBER 2012 di Kuala Lumpur area: Course Schedule:

3~6th September 2012: Basic/Intermediate Rigging Competency Course (RM 1000/Person): 4 days
14 - 15th September 2012: Scaffolding Inspection course c/w Site Inspection at site (Frame & Tubular inspection): (RM 680/person: 2 days)
18th Sept 2012: Lifting safety Awareness (RM 300/person x 1 day)
25th Sept 2012: Scaffolding Safety Awareness (RM 300/person x 1 day)
26th Sept 2012: Working Safely At Height (RM 300/person x 1 day)

Note: For competency course: Only 16 participants per session. First come first serve basis. Please register directly or call 0107766327 (Training Coordinator/Registrar)

_________________
Mohammad Zailan Haji Siwan (Irzai)
SATC Training & Construction Services
Tel: 012-3754941 / 019-6874242
Email: zailan@scaffold-access.com
http://www.facebook.com/mohammad zailan haji siwan
http://www.skype.com/irzai1973


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 443 posts ]  Go to page Previous  1 ... 41, 42, 43, 44, 45  Next

All times are UTC + 8:45 hours


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group